Technical Information Sheet Plastic Primer

Technical Information Sheet Plastic Primer

Plastic Adhesive

ColorMatic plastic adhesive is applied directly as a primer and sticks very well on all plastic interior and exterior car parts, including bumpers, mirrors and tuning parts. It can be painted over after drying for about 10 minutes with, for example, ColorMatic 1K primer filler, plastic paint or pre-fill base coat.

The ColorMatic plastic adhesive is suitable for most car and lorry interior and exterior plastic parts.


Quality and properties

  • Easy and fast application
  • Very good adhesion to most plastic car parts such as bumpers, tuning parts, mirrors
  • High elasticity
  • Very fast drying time
  • Can be directly painted over with 1K and 2K ColorMatic primer filler, RAL-acrylic topcoat and pre-fill base paints
  • High yield

Physical and chemical data

  • Basis of the binder: Polyolefin resin
  • Colour: transparent
  • Smell: solvent
  • Efficiency:
    400ml are sufficient for approx. 3 - 4 m²
    150 ml are sufficient for approx. 2 m²
  • Substrate:
    PP, PP/EPDM, ABS, SAN, PC, PA, PUR-RIM, R-TPU, PPO, PBT, PUR flexible foam, UP-GF plastics
  • Storage stability:
    10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size:
    Aerosol cand, maximum nominal volume 400 ml
  • VOC-value:
    400 ml = 276,4 g
    150 ml = 111,0 g

Environment and labelling

Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse". 
Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made. 

Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II, 

Using instructions

Before use, carefully read and observe the warning texts on the label!

  • One light coat
  • Dry for 10 minutes (20°C)
  • Recoat after 10 minutes (20°C)
  • Pre-clean undercoat thoroughly with ColorMatic antistatic Plastic Cleaner no. 174 469
  • For professional use only
  • Wear an appropriate respirator (recommended type A2/P3)
Technical Information Sheet Plastic Primer
2 min
Technical Information Sheet Plastic Primer
Technical Information Sheet Plastic Primer
20°C=10 min
Technical Information Sheet Plastic Primer
Technical Information Sheet Plastic Primer
Technical Information Sheet Plastic Primer
approx. 15 cm
Technical Information Sheet Plastic Primer
20°C=10 min

Order informations:

 Color   Product   Bundle   Art.No. 
 CM Kunststoff-Haft. farblos150   150 ml   359347 
 CM Kunststoff-Haft.farblos 400   400 ml   856563 

* no color identification possible
The presentation of colors may deviate from the original color.
For printing of the order information please press "printing preview/further products".

Examples for use

Technical Information Sheet Plastic Primer
Technical Information Sheet Plastic Primer

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.

For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.

As of October 25, 2012
This release replaces all eventually earlier issued versions


At the end of 2021, European Aerosols GmbH has passed the RE certification of the three ISO standards (ISO 9001, ISO 14001, ISO 50001) at the plants...

Read more


Aging, weather influences and other conditions can make that the plastic of headlamps by and by will be matt and unclear. Only with a little effort...

Read more



Nostalgisch verschnörkelte Gitterbettchen lassen die Herzen aller Mamas höher schlagen, denn sie sehen im Kinderzimmer einfach süß aus. Mit einem...

Read more