Aging, weather influences and other conditions can make that the plastic of headlamps by and by will be matt and unclear. Only with a little effort yellowing and enduring dirt can be removed.
Sand thoroughly with wet sanding paper P800 till all yelllowings are removed.
Sand fine with sanding paper 2000.
Now dry the sanding water with tissues and mask the ambient car parts with paper.
Afterwards clean with ColorMatic plastic cleaner.
The ColorMatic Plastic Primer will be applied in a thin spraying process and gives so the needed adhesion. After 8 to 10 minutes drying time (20° C) the clear coat can be applied.
The ColorMatic Plastic Primer will be applied in a thin spraying process and gives so the needed adhesion. After 8 to 10 minutes drying time (20° C) the clear coat can be applied.
At the end of 2021, European Aerosols GmbH has passed the RE certification of the three ISO standards (ISO 9001, ISO 14001, ISO 50001) at the plants...
Achtung, es wird schaurig! Fledermäuse fliegen und einsame Hände halten Kerzen: Halloween kann kommen! Um den typischen orange/ schwarzen Grusellook...