Damages on plastic parts

Plastic Primer is to be used especially for repair works on plastic parts in combination with DUPLI-COLOR/MoTip Autospray. Car plastic parts can also be lacquered with Plastic Spray Paint, which adheres excellently without priming. Available in 4 original plastic color shades.

 

Reparatur-Kunststoffteile-01

Clean the damaged area thoroughly and rub down with 600 gauge wet sanding paper.

Reparatur-Kunststoffteile-02

Mask off surrounding areas carefully with paper and tape, then prime with Plastic Primer (spraying distance 25 cm).

Reparatur-Kunststoffteile-03

After drying apply DUPLI-COLOR /MoTip Autospray in several thin coats.

News

Validation failed while trying to call GeorgRinger\News\ViewHelpers\Widget\Controller\PaginateController->indexAction().

Ideas

Cracks in kayaks

Porous material and holes up to 1 cm wide can easily be bridged or repaired in broken plastic using presto extra Fibreglass Filler.

 

Also suitable...

 Read more

Yellowed headlamps

Aging, weather influences and other conditions can make that the plastic of headlamps by and by will be matt and unclear. Only with a little effort...

 Read more