Technical Information Cycling Chain Spray sport
High quality lubricant to treat chains and gear wheels of bikes. Chain Spray sport has a very low friction factor for minimal resistance, maintaining the outstanding lubricating properties, even at heavy load. For heavy circumstances we advise to use MoTip Cycling Chain Spray ultra.
Applications: racing bikes, cross bikes and mountain bikes
Physical and chemical data
- Basis of the binder: synthetic oil with ceramic particles
- Colour: transparent white
- Smell: characteristic
- Relative density at 20°C: 0,88 g/ml
- Yield: 1,5 – 2,0 g/sec
- Vapour pressure at 20°C: approx. 3 bar
- Storage stability:
10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) - Size:
aerosol cans, maximum nominal volume 400 ml
Environment and labelling
Environmentally sound: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.
Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".
Marking/Labelling: All products made by European Aerosols comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.
Application:
- The aerosol should have room temperature.
- Best processing temperature 5 to 30°C.
- Shake for 2 minutes before use.
- Clean the chain and the gear wheels with MoTip Cycling Chain Cleaner Gel.
- Apply the chain spray in two thin layers.
- For an optimum result, slowly rotate the chain after treatment.
Tips for spray painting
Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.
Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!
Disclaimer of liability
This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.
As of: October 24, 2011
This release replaces all eventually earlier issued versions.