• A spray can pre-filled with propellants and specific additives. The water-based coat is transferred into the can by a filling device, producing a ready-to-use end product
• High coverage
• Simple, time-saving application
• Excellent atomisation
• Light blending
• Suitable for filling with all ColorMatic filling machines
• The dealer adds the desired coat colour and is, therefore, liable for the final product

Ideal for spot repairs

• Colour: depending on filling
• Smell: solvent
• Degree of gloss: it is necessary to re-coat basecoats with 2K clear coat. After the varnishing with clear coat the basecoat is featured with an excellent weather- and chemical resistance and a everlasting gloss.
• Efficiency:
  Depending of consistence and colour of the substrate
• Substrate:
  Depending on the colour of the substrate apply Primer Filler HG1 - HG8, ColorMatic Plastic Primer, Art.-Nr. 856 563, ColorMatic 1K Primer for Alu, art.-no. 190278, ColorMatic 1K Primer for Zinc, art.-no. 190285, ColorMatic 1K Epoxy Primer, art.-no. 174414, ColorMatic 1K Filler, art.-no. 856556 + 874987, ColorMatic 2K Hi-Speed Primer Filler, art.no. 195327
• Drying (at 20°C, 50% relative air humidity):
  The drying time depends on the ambient temperature, the air humidity, the applied paint thickness and the filled type of paint (refer to information of the paint manufacturer)
• Storage: empty cans: 5 years
  Filled cans: WB-A to WB-F, WB-H: within one week
  WB-G: within 4 days.
  WB-I: within 3 days, depending on colour up to 10 days
  If appropriate storage provided (=10°-25°C, relative air humidity max. 60%)
• Size:
  Aerosol cans, maximum nominal volume 400 ml, filling quantity 100ml
• VOC-value: 216g