Tehničke informacije Ceramic spreja
Quality and properties
- Increases the safety conditions (e.g. on stairs or bathroom floors)
- Good adhesion on concrete, asphalt, tiles, wood, metals, linoleum and most plastics
- Easy application due to an upside-down valve
- Resistant to chlorine water and saltwater
- Fast-drying
- For outdoor and indoor areas
- transparent mat
Physical and chemical data
- Basis of the binder: modified acryl-resin based lacquer
- Colour: transparent mat
- Smell: solvent
- Degree of gloss (at measurement angle 60° acc. to DIN 67530): mat: 13 gloss units
- Efficiency: Depending on the consistence of the ground: 400 ml are sufficient up to 1,6 m² (the required anti-slip effect works at a layer thickness of approx. 80µm. Because of that the indication of efficiency refers to 2 applied layers)
- Drying time (at 20°C, 50% relative air humidity):
Dust-dry: after approx. 5 minutes
Dry to touch: after approx. 30 minutes
Coatable: after 1-2 hours
Walkable/ resilient: after 24 hours
The drying time depends on surrounding temperature, air humidity and thickness of the applied coat. - Temperature-resistance (of the coating): 80°C
- Storage stability: Durability 10 years, if appropriate storage provided (temperature 10°-25°C, relative air humidity max. 60%)
- Size: aerosol cans with maximum nominal volume 400 ml
Okoliš i označavanje
Ekološki prihvatljivo: European Aerosols proizvodi su u potpunosti (100%) bez teških metala. Kape i ambalaža su izrađene od recikliranog materijala.
Odlaganje: Reciklirati i odlagati u za to predviđene spremnike samo u potpunosti prazne limenke. Limenke koje nisu prazne trebaju se zbrinuti kao "poseban otpad".
Obilježavanje/označavanje: Svi proizvodi proizvedeni u European Aerosols u skladu su sa propisima o označavanju prema direktivi 19999/45 / EG. Svi aerosoli odgovaraju TRGS 200 i TRG300 kao i aerosol direktivi 75/324/EWG u važećoj verziji.
Uputstva za upotrebu
Većina DUPLI-COLOR boja u spreju imaju takozvani zaštitni prsten ili sigurnosnu kapu kako bi se zbjegla neovlaštena upotreba. Prije upotrebe pregledati odgovarajuće savjete na poklopcu ili na naljepnici.
Prije upotrebe pažljivo pročitati upute i upozorenja na naljepnici.
Application
Before use, carefully read and observe the warning texts on the label!
- Use at 15-25°C temperature.
- The surface has to be clean, dry and free from grease.
- Shake can vigorously for 2 minutes and apply on a test area.
- Turn the spray can for upside-down application.
- Apply several layers (to achieve the required anti-slip-effect, at least 2 layers are needed).
- Wait 5 minutes between each spraying.
- Use masking tape if necessary.
- Structure depends on spray distance and number of layers.
- Apply new layers when grip effect is reduced by natural wear and tear.