Technical Information Substrate Stabilizer
DUPLI-COLOR Substrate Stabilizer solvent-free is a colourless plaster hardening with deep impact. For sanding, chalking and porous grounds, such as old and new chalk, cement and gypsum plasters, concrete, brickwork, building material of gypsum, fibre cement. For priming of chalking dispersion paints.
Physical and chemical data
- Basis of the binder: special synthetic dispersion
- Smell: neutral
- Efficiency:
1 litre is suffient for approx. 5-10 m² - Best working temperature and object temperature:
Object temperature min. 5°C. Do not expose to direct sun. - Cleaning of tools: immediately after use with water
- Storage stability:
2 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) in the unopened original container.
Store frost-free. - Size: plastic container with 1 litre
Environment and labelling
Environmentally sound: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.
Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".
Marking/Labelling: All products made by European Aerosols comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.
- The surface has to be dry, clean and fat-free.
- Before use, stir up well.
- Brush.
- Thinner: undiluted, if necessary with water.
Disclaimer of liability
This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.
As of March 24, 2018
This release replaces all eventually earlier issued versions.
