Technical Information Acrylic Mixing Colour
DUPLI-COLOR Acrylic Mixing Colour, solvent-free: the coloured dispersion paint for the direct paint or to tint inside and outside colours as well as plastering. Uses are all dispersion paints for inside and outside use. The colours yellow, pure orange, wine red or poppy-red are for outside only as full-tone suitable. For individual design, in living spaces and business premises, colourful working after the priming with white dispersion paint.
Possible grounds: masonry, plaster and concrete, wall papers, wood, dispersion paintings.
Physical and chemical data
- Basis of the binder: synthetic dispersion
- Colour: diverse
- Smell: neutral
- Degree of gloss (at measurement angle 60° acc. to DIN 67530):
matt - Cleaning of tools: immediately after use with water
- Storage stability:
2 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) in the unopened original container.
Do not store below 5°C - Size: Plastic container with 500 ml
Environment and labelling
Environmentally sound: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.
Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".
Marking/Labelling: All products made by European Aerosols comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.
Before coating:
- Cover floors and furniture with a foil.
- Mask off windows and door frames with a masking tape.
- Test the subsoil - it must be firm, dry, clean and stable.
In case it changes colour to dark during the test with a humid sponge, a primer is necessary. - Old paintings of glue-bound distemper and chalking surfaces must be completey washed off.
- If necessary, prime with a deep ground.
Coating:
- The colour is if used as spot colour ready-to-use and has only to shaked carefully.
- Can be diluted with water.
- In case of use as tinter, the basic product has to be stirred up carefully.
- Can be brushed, rolled or sprayed airless.
- In order to avoid visible transitions, start at the windows.
- Work on associated areas without breaks and as a whole.
- During working pauses wrap tightly brush or roller
- This paint can be re-coated after 4-5 hours.
- If ready, clean the tools with warm water.
Disclaimer of liability
This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.
As of March 24, 2018
This release replaces all eventually earlier issued versions.
