Technisches Merkblatt NICRO 304 Glanzzink
Beschichtung für Eisenteile aus Zink und Aluminium
NICRO 304 Glanzzink ergibt eine perfekte Zink-Alu-Beschichtung für alte, verwitterte, verzinkte Metalle und hinterlässt einen glänzenden Aluminium-Effekt. Die Zink-Pigmente ergeben einen kathodischen Langzeit-Korrosionsschutz durch Kalt-Galvanisierung auf allen Stahl- und Eisenteilen.
NICRO 304 Glanzzink enthält einen hohen Anteil an reinem Zink (80%) und Alu (10%) Pigmenten.
NICRO 304 Glanzzink ist ideal zur Beschichtung von Metallen – vor und nach dem Schweißen – geeignet und gewährleistet besten Langzeit-Korrosionsschutz für die Schweißnähte.
Einsatzgebiete:
- Stahl- und Eisenkonstruktionen
- Maschinenbau
- Schlossereien
- Fahrzeugbau
- Chemiebetriebe
- Schiffs- und Bootsbau
Qualität und Eigenschaften
- wirkungsvolle Grundierung mit kurzer Trocknungszeit
- haftet auf allen Metallen
- Hitzebeständig bis 400°C
- beständig nach 400h Salzsprühtest
- schützt nachhaltig vor Rost
- witterungsbeständig
- temperaturbeständig
- beständig gegen Wasser, Salzwasser und viele Lösungsmittel
- überlackierbar
- schweißbar
- 2 Sprühköpfe: Rund- und Breitstrahl-Zerstäubung
Physikalische und chemische Daten
- Farbe: hellgrau, glänzend
- Geruch: Eigengeruch
- Treibmittel: Propan-Butan
- Dichte: 1,10 g/ml, 20°C / DIN 51 757 C
- Auslaufzeit: 12s, 15°C, 100ml, 4mm / DIN EN ISO 2431
- Staubtrockenheit: 15 Min./20°C
- Überlackierbarkeit: nach 3h bis 4h
- Aushärtungszeit: nach 24h, 20°C, vollständig ausgehärtet und chemisch und physikalisch belastbar
- Schwitzwasserkorrosionstest: 720h, 32°C, DIN 50 017
- Salzsprühtest: 400h, 100°C bis 150°C, DIN 50 021
- Wasserlöslichkeit: unlöslich
- Temperaturbeständigkeit: bis +400°C, DIN 50 021
- Haltbarkeit/Lagerung:
10 Jahre bei sachgerechter Lagerung (=10°-25°C, relative Luftfeuchte von max. 60%) - Gebinde/Inhalt:
Aeorosoldose mit 500ml Nettovolumen
Environment and labelling
Environmentally sound: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.
Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".
Marking/Labelling: All products made by European Aerosols comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.
Anwendung:
NICRO 304 Glanzzink Aerosol-Dose vor Gebrauch 2 Min. gründlich schütteln (Absetzverhalten der Zinkpigmente). In mehreren, dünnen Schichten aufsprühen.
Vor der Anwendung Teile und Oberflächen gründlich reinigen, entfetten und anschleifen. Evtl. vorhandene Roststellen gründlich entfernen.
Probesprühen
Tips for spray painting
Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.
Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!
Disclaimer of liability
This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.
Stand: 08. Juli 2014
Mit dieser Version werden alle evtl. früher erschienenen Versionen ungültig.