Technisches Merkblatt NICRO HIGH-COAT RAL-Farbtöne
Qualität und Eigenschaften
- Hochwertiger Acryl-Lack
- Einfache Verarbeitung
- Durch Profi-Zerstäubung auch für größere Flächen einsetzbar
- Extrem hohe Pigmentierung und spezifische Additive sorgen für hohe Deckkraft
- Ermöglicht hohe Schichtdicken bei geringer Läuferneigung
- Schnelle Trocknung
- Guter Verlauf
- Einfache, zeitsparende Verarbeitung
- variabler FlexJet Sprühkopf: stufenlos einstellbare Rund- und Breitstrahl-Zerstäubung
Physikalische und chemische Daten
- Farbe: RAL-Farbtöne, NFZ-Farbtöne
- Geruch: Lösemittel
- Treibmittel: Propan-Butan
- Bindemittelbasis: Acrylharz
- Glanzgrad: glänzend: 80 GE, matt: 10 GE- 60° Messwinkel, DIN 67 530
- Ergiebigkeit: ca. 1 m²
- Temperaturbeständigkeit: bis +90°C
- Staubtrocken: nach 10 Minuten /20°C
- Grifffest: nach 30 Minuten /20°C
- Haltbarkeit/Lagerung:
10 Jahre bei sachgerechter Lagerung (=10°-25°C, relative Luftfeuchte von max. 60%) - Gebinde/Inhalt:
Aerosol mit 500 ml Nettovolumen
Environment and labelling
Environmentally sound: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.
Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".
Marking/Labelling: All products made by European Aerosols comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.
Anwendung:
NICRO HIGH-COAT RAL-Acryllack vor Gebrauch 2Min. gründlich schütteln. In mehreren, dünnen Schichten aufsprühen.
Vor der Anwendung Teile und Oberflächen gründlich reinigen, entfetten und anschleifen. Evtl. vorhandene Roststellen gründlich entfernen. Grundieren mit NICRO HIGH-COAT Epoxy-Primer grau, Art.-NR. 384 738
Probesprühen
Tips for spray painting
Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.
Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!
Disclaimer of liability
This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.
Stand: 08. Juli 2014
Mit dieser Version werden alle evtl. früher erschienenen Versionen ungültig.