Technisches Merkblatt NICRO 607 Kriechöl
Qualität und Eigenschaften
- zieht in engste Spalten ein
- schmiert dauerhaft
- besitzt eine ausgezeichnete Hochdruckbeständigkeit
- vermindert Reibung und Verschleiß
- konserviert und schützt vor Feuchtigkeit und Korrosion
- löst verharzte Öl- und Fettrückstände
- temperaturbeständig
- oxidationsstabil
- anti-statische Wirkung
- temperaturbeständig bis 200 °C
- silikonfrei
- biologisch abbaubar
Physikalische und chemische Daten
- Farbe: hellgelb
- Geruch: Eigengeruch
- Treibmittel: CO², Vorteile s. u.
- Dichte: 0,98g/ml, 20°C
- Stockpunkt Grundöl: -50°C, ISO 3016
- Verdunstungsverlust: rund 0,01%, 150° °C, 73h
- Viskosität kinematisch: 108mm²/S, 40°C, DIN 51 757 C
- Viskositätsindex: 108, ISO 2909
- CLP-Schmieröl: Oxidationsschutz, Korrosionsschutz, Verschleißschutz,
DIN 51 517 - Gutkraft Grundöl: 7.000 N, 1 Min., 1490 upm. DIN 51 350 Teil 2
- Schweißkraft Grundöl: 7.000 N, 1 Min., 1490 upm. DIN 51 350 Teil 2
- Verschleißkennwert Grundöl: 0,02mm², 500 N, 6.000m,
Reibert Reibverschleißwaage - Schliffmarke: 1,7mm², 500 N, 6.000m,
Reibert Reibverschleißwaage - Druckbelastung, maximal: 290N/mm², 500N, 6.000m,
Berechnung nach Brugger - Dynamische Schmierprüfung: bestanden, SKFR2F-DIN 51 806
- Korrosionstest: bestanden, DIN 51 802
- Kupferkorrosion: 4c, 130°C, 3h, ISO 2160
- Wasserlöslichkeit: unlöslich
- Temperaturbeständigkeit: -80°C bis + 225°C
- Einsatzbereich: -45°C bis +150°C, kurzfristig bis +200°C
- Haltbarkeit/Lagerung:
10 Jahre bei sachgerechter Lagerung (=10°-25°C, relative Luftfeuchte von max. 60%)
Gebinde/Inhalt:
Aeorosoldose mit 400ml Nettovolumen
Vorteile CO²-Treibmittel:
- Umwelt-neutral – da das CO² Treibmittel der Atmosphäre entnommen wird und kein zusätzliches CO² erzeugt wird
- Unbrennbar
- ungiftig
- reagiert nicht mit anderen chemischen Substanzen
- daher: 100% reiner Wirkstoffanteil
- Höhere Ergiebigkeit, da der CO² Treibmittel-Anteil nur ca. 2% am Gesamt-Produkt beträgt.
Environment and labelling
Environmentally sound: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.
Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".
Marking/Labelling: All products made by European Aerosols comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.
Anwendung:
- Bei Geräten unter Hochspannung sicherstellen, dass diese nicht unter Spannung stehen.
- Die zu schmierenden Teile mit NICRO 607 Kriechöl besprühen. Stark beschmutzte Teile zuvor mit NICRO 901 K-3-S Reiniger reinigen.
Tips for spray painting
Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.
Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!
Disclaimer of liability
This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.
Stand: 08. Juli 2014
Mit dieser Version werden alle evtl. früher erschienenen Versionen ungültig.