Technisches Merkblatt Kleberentferner

Qualität und Eigenschaften

  • Extreme Lösekraft
  • Problemlose Anwendung

Physikalische und chemische Daten

  • Basis: 30 % aromatische Kohlenwasserstoffe, < 5 % nichtionische Tenside, Additive
  • Flammpunkt: 32 °C
  • Dichte: ca. 094 g/cm³

Environment and labelling

Environmentally sound: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".

Marking/Labelling: All products made by  European Aerosols comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200  and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.

Using instructions

Before use, carefully read and observe the warning texts on the label!

Anwendung

    • Klebstoffreste einstreichen und einwirken lassen.
    • Angelöste, angequollene Kleberreste mit einem Spachtel abschieben und mit Wasser gut nachwaschen.
    • Kleinere zu reinigende Teile in presto Kleber-Entferner einlegen, einwirken lassen, Reste entfernen und mit Wasser nachspülen.
    • Achtung: Untergründe aus Kunststoff oder andere nicht lösemittelbeständige Materialien können angegriffen werden. Daher Materialverträglichkeit an verdeckter Stelle vorher prüfen. Nicht auf porösen, saugenden Untergründen verwenden!
    • Pinsel oder sonstige Arbeitsgeräte nach Beendigung der Arbeit sofort in presto Kleber-Entferner tauchen und gut durchwalken. Anschließend mit Wasser gut auswaschen.

 

Bestellangaben

* kleuridentificatie niet mogelijk
De weergegeven kleuren wijken mogelijk af van de originele kleuren.
Om de productgegevens af te drukken, klik op "printing preview/further products".

There are no prdocuts to show.

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.

Stand: 19. September 2018
Mit dieser Version werden alle evtl. früher erschienenen Versionen ungültig.