Technisches Merkblatt 2-Schicht-Klarlack

Technisches Merkblatt 2-Schicht-Klarlack

Witterungsbeständiger, hochglänzender Überzugslack für Acryl-Sprays.

Unbedingt erforderlich zur Versiegelung von allen Metallic- und Pearllacken, da diese sonst durch Witterungs- und Umwelteinflüsse angegriffen werden.

Auch geeignet für das Überlackieren von presto Felgenspray.

Qualität und Eigenschaften

  • Hochwertige Acryl-Qualität
  • Schnelltrocknend
  • Dauerhafter Glanz
  • Ausgezeichnete Haftung
  • Hohe Oberflächenhärte bei gleichzeitig guter Elastizität
  • Guter Verlauf, glatte Oberfläche
  • Geeignet für das Lackieren von Objekten im Innen- und Außenbereich
  • Polierfähig
  • Schmutzunempfindlich durch besonders glatte Oberfläche
  • Wetterfest, lichtecht, UV-beständig (vergilbungsfrei)
  • Kratz-, stoß- und schlagfest
  • Bedingt benzinbeständig

Physikalische und chemische Daten

  • Bindemittelbasis: Acrylat-Mischpolymere
  • Farbe: farblos
  • Geruch: nach Lösemittel
  • Glanzgrad: im 60° Messwinkel nach DIN 67530
    glänzend: 80-85 GE
  • Ergiebigkeit:
    Je nach Beschaffenheit und Farbe des Untergrundes reichen
    150 ml für ca. 0,5 m²
    400 ml für ca. 1,3 m²
  • Trocknung (bei 20°C, 50% relative Luftfeuchte):
    Staubtrocken: nach 10 Minuten
    Grifffest: nach 60 Minuten
    Durchgetrocknet/polierfähig: nach ca. 24 Stunden
    Die Trocknungszeit ist abhängig von der Umgebungstemperatur, der Luftfeuchtigkeit und der aufgetragenen Schichtstärke.
  • Temperaturbeständigkeit: bis 80°C
  • Haltbarkeit/Lagerung:
    10 Jahre bei sachgerechter Lagerung (=10°-25°C, relative Luftfeuchte von max. 60%)
  • Gebinde/Inhalt:
    Aerosoldosen, maximales Nennvolumen 150 ml bzw. 400 m

Environment and labelling

Environmentally sound: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".

Marking/Labelling: All products made by  European Aerosols comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200  and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.

Using instructions

The most presto spray paints have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label.
Before use, carefully read and observe the warning texts on the labels!

Anwendung

  • Die vorangegangene Metallic-Lackierung mindestens 30 Minuten trocknen lassen. Bitte beachten Sie hierbei den Anwendungstext für den Metallic-Lack.
  • Vor Gebrauch die Klarlackdose 1 Minute schütteln.
  • Aus ca 25 cm Abstand im Kreuzgang mehrere dünne Schichten Klarlack aufsprühen.
  • Nicht auf mit Kunstharz lackierte Flächen sprühen!
  • Der Sprühnebel kann nach 24 Stunden mit PRESTO Polier- und Schleifpaste wegpoliert werden.

Tips for spray painting

Protect the object and the surrounding area from spray mist. When painting small areas it is recommended that a piece of card is used as a mask, with a hole cut in it slightly larger than the area to be sprayed. The mask should be held 1 to 2 cm from the surface. With this method, the mainly part of the spray mist is brought under control. It recommends to mask parts not to be lacquered, to protect the surrounding against the spray mist.

The aerosol can should have room temperature.

Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

 

Bestellangaben

* kleuridentificatie niet mogelijk
De weergegeven kleuren wijken mogelijk af van de originele kleuren.
Om de productgegevens af te drukken, klik op "printing preview/further products".

There are no prdocuts to show.

Anwendungsbeispiele

Technisches Merkblatt 2-Schicht-Klarlack
Technisches Merkblatt 2-Schicht-Klarlack

Disclaimer of liability

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.

Stand: 29. April 2010
Mit dieser Version werden alle evtl. früher erschienenen Versionen ungültig.

NIEUWS

Vorig jaar vond de opening van ons Experience Center in Wolvega plaats. Deze nieuwe locatie aan de overkant van het hoofdkantoor in Nederland is de...

Meer lezen

IDEEËN

Lelijke deuken op vleugels of bumpers kunnen snel en gemakkelijk verwijderd worden met MoTip laksprays.

Meer lezen

De ideale en goedkope manier om zeer sterke en hittebestendige metalen schakels te repareren met presto kleefstaal.

 

Ook geschikt voor gebruik op: ...

Meer lezen