Technical Information Engine Impregnation
Quality and properties
- Dirty car door rails can be cleaned easily without water
- Effective protection from rust
- Adds gloss to the treated surface
- Safeguards the electrical system current
- Economical and easy to use
- Excellent creep properties, penetrates well
- Protects against de-icing salts
- Displaces water
Environment and labelling
Environmentally sound: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.
Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".
Marking/Labelling: All products made by European Aerosols comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.
Application:
- Engine must be completely cool before use.
- Once the engine has been thoroughly washed, spray the engine block and compartment with presto motor impregnation.
- The engine compartment can be treated when wet.
- Leave it to dry thoroughly.
- We recommend polishing door tie bars with a cloth.
- Do not spray on a running engine. Not for use during ignition. Do not spray on red-hot or warm objects (manifolds, exhaust pipes).
Disclaimer of liability
This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.
As of February 8, 2010
This release replaces all eventually earlier issued versions.