Technical Information Acrylic 2in1 Paint
DUPLI-COLOR acrylic-based 2in1 paint is low-odour, water-dilutable, resistant and fast drying top coat. It enables paintings in the highest possible quality.
The Clear Lacquer in this series is high transparent and ideal suitable as gloss coat on already painted surfaces.
The paint is excellently suitable for all paintable surfaces like wood, metal, stone, plaster, rigid plastic, zinc etc. and bearing old coats.
Physical and chemical data
- Basis of the binder: Acrylate dispersion on base of water
- Colour: miscellanous
- Smell: neutral
- Degree of gloss (at measurement angle 60° acc. to DIN 67530):
satin gloss and matt - Efficiency:
per 125 ml can: approx. 1,5 m²
per 250 ml can: approx. 3 m²
per 750 ml can: approx. 9 m² - Drying time (at 20°C, 65% relative air humidity):
Dust-dry: after 3-4 hours
Coatable after 12 hours
The drying time depends on surrounding temperature, air humidity and absorpitivity of the ground. - Best working temperature and object temperature:
Object temperature min. +5°C - Cleaning of tools: immediately after use with warm water and if necessry with a cleaner?
- Storage stability:
5 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) in the unopened original container.
Do not store below 5°C - Size: metal tins 125 ml, 250 ml and 750 ml
Environment and labelling
Environmentally sound: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.
Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".
Marking/Labelling: All products made by European Aerosols comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.
Preparation of the ground:
- The surface has to be dry, clean and free from fat and rust.
- Remove old flaking paintings which are not bearing.
- Sand surface and prime with DUPLI-COLOR Aqua Universal Primer, rough wood with wood impregnating ground and metal with Rust Protection Primer.
Painting:
- Before application, always carefully stir up the paint
- Temperature of the object and surrounding temperature should be at least +??°C
- Working with brush, roll or airless spray
- Apply 1-2 final coats depending on wear.
Order information
| Color | Product | Bundle | Art.No. |
 |
Acryllack Klarlack gl. 250 | 250 ml | 168369 |
|
Acryllack Klarlack gl. 750 | 750 ml | 168659 |
|
Acryllack Klarlack sdm. 250 | 250 ml | 168376 |
|
Acryllack Klarlack sdm. 750 | 750 ml | 168666 |
 |
Acryllack RAL 1021 gl. 250 | 250 ml | 168253 |
|
Acryllack RAL 1021 gl. 750 | 750 ml | 168499 |
 |
Acryllack RAL 2003 gl. 250 | 250 ml | 168260 |
 |
Acryllack RAL 3000 gl. 250 | 250 ml | 168277 |
|
Acryllack RAL 3000 gl. 750 | 750 ml | 168512 |
 |
Acryllack RAL 3020 gl. 750 | 750 ml | 168536 |
Disclaimer of liability
This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.
As of March 23, 2018
This release replaces all eventually earlier issued versions.
