Technical Information Typre Repair
Environment and labelling
Environmentally sound: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.
Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".
Marking/Labelling: All products made by European Aerosols comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.
Application:
- Bring can to room temperature.
- Operating temperature 15 to 25°C.
- Shake for 2 minutes before use.
- Identify reason for puncture and remove.
- Let the air out of the tyres.
- Turn tyre so that the leak is pointing downwards.
- Screw adapter onto valve.
- Turn puncture spray and spray till empty.
- The spray spreads evenly into the tyre.
- You can now drive ca. 10 minutes or 5 kilometers.
- Drive to the nearest petrol station to change the tyre.
- Inform person fixing your tyre that you have used tyre spray so they can release the gas.
Disclaimer of liability
This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.
As of: May 7, 2010
This release replaces all eventually earlier issued versions.
