Technical Information Contact Spray
Quality and properties
- Water and moisture are infiltrated and displaced
- Excellent adhesion and penetration
- Protects contacts and prevents corrosion
- Resistant to water, salts and weak bases
- Directed jet spray
- This product is equipped with a special cap, which contains a tube and a spray nozzle that can be used to reach inaccessible places.
- Observe TRG 300
Environment and labelling
Environmentally sound: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.
Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".
Marking/Labelling: All products made by European Aerosols comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.
Application:
- Make sure can is at room temperature.
- Application temperature 5 ° to 30 ° C.
- Switch electrical equipment off before treating.
- Surfaces must be clean, dry and free of grease.
- Shake can well before use.
- Spray several thin layers on connectors, cables, distributor caps, etc.
Disclaimer of liability
This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.
As of March 12, 2014
This release replaces all eventually earlier issued versions.
