2K Technology - Application

remove cap
  1. Use a suitable tool (e.g. screwdriver) to remove the protective cap on the bottom of the can.
    There is a ring in the protective cap, which you pull through the eyelet on the bottom of the can.
  2. Pull hard on the metal ring as far as it will go and
  3. twist once by 360°. After that, shake well and thoroughly for approx. 3 minutes.

1.Remove protective cap.

2. Take ring out of the protective cap.

3. Guide ring through the eyelet.

4. Pull hard and twist once by 360°. The blade on the inside cuts the cartridge open.

5. After shaking vigorously, the 2K spray is ready to use.