Technical information Aqua Insulating Spray
Fast drying waterbased insulating primer spray for interior and exterior application with excellent isolation and barrier effect against many different types of stains (especially water stains) on mineral-based substrates (plaster etc.), wood and concrete. Can be painted over with all emulsion paints, alkyd-based, water-based and acrylic paints; not with two-component paints. Adjustable spray cone width (horizontally and vertically).
Application area: Ideal when fastness and mobility are the primary considerations.
Quality and properties
- Insulating and priming in one go
- Quick and easy use
- Low in odour
- Waterbased
- Excellent insulating and blocking behaviour against many kinds of spot, e.g. water stains or mildew on mineral grounds (pastering etc.), wood or concrete
- Coatable with all dispersion paints and watersoluble acrylic paints
Physical and chemical data
- Basis: Waterbased
- Colour: white
- Efficiency:
Depending on consistence and colour of the ground:
400 ml are sufficient for appox. 2m² - Substrate:
Wood, metal and on minerally substrates like concrete, stone, plastering etc. - Drying time (at 20°C, 50% relative air humidity):
Dust-dry: 30 min
Re-coatable: 2 h
The drying time depends on surrounding temperature, air humidity and thickness of the applied coat. - Temperature resistance: 80°
- Storage stability:
2 years if appropriabte storage provided (=10°-25°C, relative air humidity of max. 60%) - Size:
Aerosol cans, maximum nominal volume 400 ml
Environment and labelling
Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.
Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse".
Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made.
Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II,
- Clean surfaces to be painted thoroughly with DUPLI-COLOR Degreaser Spray art.no. 478376, then sand
- The ground has to be clean, dry and free from fat.
- Mask off areas not to be painted.
- Shake can for 3 minutes.
- Test spray.
- Spray 2 or 3 thin coats. Let dry in between.
- Dust-dry after approx. 30 minutes, can be overpainted after 2h.
- After application clean the sprayhead.
Disclaimer of liability
This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.
As of March 19, 2019
This release replaces all eventually earlier issued version.