Technical Information Wet Leak Finder
White powder spray for locating leaks of oil, fuel or other liquids. Enables the exact location of leaks in the body, radiator, engine block, transmission housing, power steering, fuel lines, pipes, pumps, etc. Easy to remove after use.
For use on:
For inspection of engines, gearboxes, pumps, tanks, pipes and other parts through which liquid passes.
Physical and chemical data
- Basis: Talc
- Colour: white
- Smell: characteristic
- Appearance: floury, powdery
- VOC value: 96% / 566 g/l
- Relative density at 20°C: 0.81 g/ml
- Yield: 2.0 g/sec.
- Storage stability:
- 10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
- Size:
aerosol can, maximum nominal volume 400 ml
Environment and labelling
Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.
Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse".
Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 - VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made.
Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II,
Application:
- Bring the can to room temperature.
- Working temperature 5° to 30°C.
- Shake the can for 2 minutes before use.
- The area to be tested should be clean and dry.
- Apply the spray to the suspected zone to detect the leakage.
- Spray distance approx. 25 cm.
- Spray on evenly and allow to flash off well.
- Leaks become clearly visible on the powder layer that forms.
Tips for spray painting
Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.
Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!
Disclaimer of liability
This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. European Aerosols is let off the liability, unless the liability-based incident is caused by a fault incurred to European Aerosols.
As of: February 09, 2021
This release replaces all eventually earlier issued versions.
